本課程是物联网（IOT）程序设计入门專項課程專項課程的一部分

4.7
星
6,879 個評分

Ian Harris

175,562 人已註冊

提供方

物联网（IOT）程序设计入门專項課程加州大学尔湾分校

課程信息

86,250 次近期查看

The Arduino is an open-source computer hardware/software platform for building digital devices and interactive objects that can sense and control the physical world around them. In this class you will learn how the Arduino platform works in terms of the physical board and libraries and the IDE (integrated development environment). You will also learn about shields, which are smaller boards that plug into the main Arduino board to perform other functions such as sensing light, heat, GPS tracking, or providing a user interface display. The course will also cover programming the Arduino using C code and accessing the pins on the board via the software to control external devices. Please note that this course does not include discussion forums.
Upon completing this course, you will be able to:
      Outline the composition of the Arduino development board
      Describe what it means to program the board's firmware
      Read board schematics
      Install Arduino IDE
      Describe what "shields" are and how they are used
      Specify the role of libraries in the use of shields
      Compile and run a program
      Name C Variables and Types
      Name common C operators
    Use conditionals and loops
    Explain functions, their definition and invocation
    Explain the implications of global variables
    Undertake the Arduino build process
    Describe the role of the tools behind the IDE
    Describe how to invoke functions in classes
    Explain the structure of an Arduino sketch
    Access the pins of the Arduino
    Differentiate between digital and analog pin
    Debug embedded software
    Explain the importance of controllability and observability in the debugging process
    Describe common debugging architectures for embedded systems
    Explain how the UART Serial communication protocol works
    Describe how the Arduino Serial library performs serial communication

可靈活調整截止日期

根據您的日程表重置截止日期。

可分享的證書

完成後獲得證書

100% 在線

立即開始，按照自己的計劃學習。

第 2 門課程（共 6 門）

物联网（IOT）程序设计入门專項課程

完成時間大約為13 小時

英語（English）

對員工進行熱門技能培訓能否為您的公司帶來益處？

體驗 Coursera 企業版

您將獲得的技能

Arduino
C Programming
Debugging

可靈活調整截止日期

根據您的日程表重置截止日期。

可分享的證書

完成後獲得證書

100% 在線

立即開始，按照自己的計劃學習。

第 2 門課程（共 6 門）

物联网（IOT）程序设计入门專項課程

完成時間大約為13 小時

英語（English）

對員工進行熱門技能培訓能否為您的公司帶來益處？

體驗 Coursera 企業版

授課教師

授課教師評分

4.71/5 （1,047 個評分）

Ian Harris

Professor

Department of Computer Science

521,485 個學生

9 門課程

提供方

加州大学尔湾分校

Since 1965, the University of California, Irvine has combined the strengths of a major research university with the bounty of an incomparable Southern California location. UCI’s unyielding commitment to rigorous academics, cutting-edge research, and leadership and character development makes the campus a driving force for innovation and discovery that serves our local, national and global communities in many ways.

了解頂級公司的員工如何掌握熱門技能

了解關於 Coursera for Business 的更多信息

授課大綱 - 您將從這門課程中學到什麼

內容評分96%（26,674 個評分）

週

週 1

完成時間為 3 小時

Arduino Environment

This module provides an introduction to the Arduino environment which is composed of three things: the Arduino board, the Arduino IDE, and the Arduino-compatible shields together with their libraries. We first investigate the board, discussing all of its main components, inputs, and outputs. We discuss how each component is used and we examine the board schematic to see how they are connected. We then discuss the Arduino Integrated Development Environment (IDE) which is used primarily to write, compile, and upload code. We survey the interface of the IDE and discuss how to install and use it. We also examine the use of shields to extend the functionality of an Arduino-based system. We discuss how shield libraries provide a useful abstraction to facilitate programming.

完成時間為 3 小時

9 個視頻（總計 51 分鐘）, 4 個閱讀材料, 2 個測驗

9 個視頻

Module 1 Introduction (video)1分鐘

Lecture 1.1: Arduino Platform8分鐘

Lecture 1.2: Arduino Board7分鐘

Lecture 1.3: Direct Programming3分鐘

Lecture 2.1: Arduino Schematics4分鐘

Lecture 2.2: Arduino IDE7分鐘

Lecture 2.3: Compiling Code4分鐘

Lecture 3.1: Arduino Shields and Libraries6分鐘

Lecture 3.2: Arduino Basic Setup6分鐘

4 個閱讀材料

Pre-Course Survey10分鐘

Course Overview10分鐘

Module 1 Objectives10分鐘

Module 1 Reading10分鐘

1 個練習

Module 1 Quiz30分鐘

週

週 2

完成時間為 3 小時

C Programming

This module covers the basics of the C programming language which will be used to write code for the Arduino. The course first covers basic syntax, variables, and types. Most of the basic C operators are presented. Conditional statements (if, switch) and loops (while, for) are described. The concept of functions is presented together with how to define and call functions. Creation and use of global variables is explained.

完成時間為 3 小時

9 個視頻（總計 62 分鐘）, 4 個閱讀材料, 2 個測驗

9 個視頻

Module 2 Introduction (video)54

Lecture 1.1: Setting Up Your Environment7分鐘

Lecture 1.2: Hello World6分鐘

Lecture 1.3: Variables4分鐘

Lecture 2.1: Basic C Operators6分鐘

Lecture 2.2: Conditionals7分鐘

Lecture 2.3: Loops8分鐘

Lecture 3.1: Functions10分鐘

Lecture 3.2: Global Variables7分鐘

4 個閱讀材料

Module 2 Objectives10分鐘

Module 2 Mandatory Reading10分鐘

Module 2, Recommended Reading10分鐘

Planning Ahead for Modules 3 and 410分鐘

1 個練習

Module 2 Quiz30分鐘

週

週 3

完成時間為 3 小時

Arduino Programs

This module describes the composition of an Arduino program, or sketch, and the process by which it is compiled and uploaded. The Arduino IDE is a user interface for the software tools which actually compile and upload the program. We outline the use of these tools in the build process. We describe the basic structure of a sketch, including the use of the setup() and loop() functions. The main interface of an Arduino is through its pins, so we describe how to access those pins from a sketch.

完成時間為 3 小時

10 個視頻（總計 58 分鐘）, 3 個閱讀材料, 2 個測驗

10 個視頻

Module 3 Introduction (video)1分鐘

Lecture 1.1: Arduino Toolchain5分鐘

Lecture 1.2: Cross-Compilation4分鐘

Lecture 1.3: Arduino Sketches9分鐘

Lecture 2.1: Classes7分鐘

Lecture 2.2: Sketch Structure4分鐘

Lecture 2.3: Pins7分鐘

Lecture 3.1: Input and Output6分鐘

Lecture 3.2: Blink Example5分鐘

Video Demonstration: Arduino Blink Example4分鐘

3 個閱讀材料

Module 3 Objectives10分鐘

Module 3 Reading10分鐘

Information About the Arduino10分鐘

1 個練習

Module 3 Quiz30分鐘

週

週 4

完成時間為 3 小時

Module 4

This module is an introduction on debugging embedded software on an Arduino. We discuss the basic debugging requirements: controllability and observability. The debugging environment available for an Arduino UNO is limited, so we describe how to use the UART communication protocol to gain controllability and observability. We present the use of the Serial library to communicate with the Arduino through the serial monitor.

完成時間為 3 小時

9 個視頻（總計 72 分鐘）, 4 個閱讀材料, 2 個測驗

9 個視頻

Module 4 Introduction (video)1分鐘

Lecture 1.1: Debugging12分鐘

Lecture 1.2: Debug Environments12分鐘

Lecture 1.3: Debug via Serial8分鐘

Lecture 2.1: UART Protocol7分鐘

Lecture 2.2: UART Synchronization7分鐘

Lecture 2.3: UART Parity and Stop6分鐘

Lecture 3.1: Serial on Arduino (Updated)11分鐘

Lecture 3.2: Reading from Serial4分鐘

4 個閱讀材料

Module 4 Objectives10分鐘

Module 4 Reading10分鐘

Information about the Arduino10分鐘

End-of-Course Survey10分鐘

1 個練習

Module 4 Quiz30分鐘

審閱

4.7

1559 條評論

5 stars
73.23%
4 stars
21.54%
3 stars
3.64%
2 stars
0.84%
1 star
0.72%

來自ARDUINO 平台与 C 语言程序设计的熱門評論

由 AK 提供2021年4月15日

I like the instructor a lot and his teaching is amazing. Also I had the opportunity to work with Arduino board and get hands on it. But overall course level was too easy for me in terms of coding.

由 MR 提供2016年8月8日

A very good course to teach you the basics of Arduino platform and IDE. It'll help you get started on how to code your programs and lets you build up on it. I'd definitely recommend for a beginner.

由 AG 提供2020年5月29日

very nice and handy course for arduino beginners. but you need a little bit of knowledge about microcontrollers beforehand. you cannot start with an absolutely blank canvas.

由 RS 提供2017年10月1日

Nice course. The platform and programming is explained in a simple way. If you are already a C or C++ programmer, only the topics dealing with the Arduino platform will be important.

查看所有評論

關於物联网（IOT）程序设计入门專項課程

Design, create, and deploy a fun IoT device using Arduino and Raspberry Pi platforms.

This Specialization covers embedded systems, the Raspberry Pi Platform, and the Arduino environment for building devices that can control the physical world. In the final Capstone Project, you’ll apply the skills you learned by designing, building, and testing a microcontroller-based embedded system, producing a unique final project suitable for showcasing to future employers. Please note that this specialization does not offer discussion forums.

常見問題

我什么时候能够访问课程视频和作业？
讲座和作业的访问权限取决于您的注册类型。如果您以旁听模式参加课程，则可以免费查看大多数课程资料。要访问评分作业并获得证书，您需要在旁听期间或之后购买证书体验。如果看不到旁听选项：
课程可能不提供旁听选项。您可以尝试免费试用，也可以申请助学金。
课程可能会改为提供'完整课程，没有证书'。通过此选项，您可以查看所有课程材料、提交所要求的作业，以及获得最终成绩。这也意味着您将无法购买证书体验。
我订阅此专项课程后会得到什么？
您注册课程后，将有权访问专项课程中的所有课程，并且会在完成课程后获得证书。您的电子课程证书将添加到您的成就页中，您可以通过该页打印您的课程证书或将其添加到您的领英档案中。如果您只想阅读和查看课程内容，可以免费旁听课程。
有助学金吗？
是的。如果您负担不起学习计划的注册费，则可以在选择学习计划时申请助学金或奖学金。如果您选择的学习计划提供助学金或奖学金，则您将在描述页面上看到一个申请链接。

還有其他問題嗎？請訪問學生幫助中心。

培養員工技能，推動業務成果

探索 Coursera for Business

Arduino 平台与 C 语言程序设计

課程信息

您將獲得的技能