Chevron Left
返回到 Sensor Manufacturing and Process Control

學生對 科罗拉多大学波德分校 提供的 Sensor Manufacturing and Process Control 的評價和反饋

4.6
247 個評分

課程概述

"Sensor Manufacturing and Process Control" can also be taken for academic credit as ECEA 5343, part of CU Boulder’s Master of Science in Electrical Engineering degree. This is our fourth course in our specialization on Embedding Sensor and Motors. To get the most out of this course, you should first take our first course entitled "Sensors and Sensor Circuits", our second course entitled "Motor and Motor Control Circuits", and our third course entitled "Pressure, Force, Motion, and Humidity Sensors". Our first course gives you a tutorial on how to use the hardware and software development kit we have chosen for the lab exercises. Our second and third courses give you three hands-on lab experiments using the kit. This third course assumes that you already know how to use the kit. You will learn about sensor signal characterization and manufacturing techniques and how to optimize the accuracy of sensors. You will also learn about more advanced sensors, proportional-integral-derivative (PID) control, and how this method is used to give you a closed loop sensor feedback system. After taking this course, you will be able to: ● Understand how sensor manufacturers characterize and calibrate their sensors. ● Tune a PID control loop and access the PID control function of the Cypress PSoC development kit for a motor control application. ● Understand manufacturing methods used to build electro-mechanical and micro-machined sensors. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. Or, you may obtain the specs from the site, and purchase them elsewhere. All are quantity one except for N107-ND where you need three, and 493-15371-ND where you need two. 428-3390-ND P14355-ND FQU13N10LTU-ND N107-ND 1N5393-E3/54GICT-ND RNF14FTD1K00CT-ND P0.62W-1BK-ND 493-15371-ND Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on www.digikey.com or o Digilent 410-324 | OpenScope MZ available on www.newark.com Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - https://www.amazon.com/dp/B009H4AYII o SainSmart DSO212 - https://www.amazon.com/dp/B074QBQNB7 o PoScope Mega50 USB - https://www.robotshop.com/en/poscope-mega50-usb-mso-oscilloscope.html o ADALM2000 - https://www.digikey.com/en/products/detail/analog-devices-inc./ADALM2000/7019661...

熱門審閱

KM

2020年11月15日

Great course to learn about

Sensor Manufacturing and Process Control in details.I highly recommend this course and thank you all.

GQ

2021年4月12日

This program is exceptional and really practical. Challenging computations in Process Control and Instrumentation .Awesome

篩選依據:

1 - Sensor Manufacturing and Process Control 的 25 個評論(共 53 個)

創建者 Guillaume V

2020年5月17日

創建者 G . p

2020年6月6日

創建者 Bhargav c

2020年7月28日

創建者 AKBAR A P

2020年10月13日

創建者 Ngo T D

2021年3月13日

創建者 AMALNATH M P

2020年10月19日

創建者 Nithis r k

2020年9月21日

創建者 Samriddhi V K

2020年5月24日

創建者 Himanshu G

2020年6月1日

創建者 Parishi N

2020年4月16日

創建者 Sheikh A M (

2020年7月2日

創建者 Kasuntha M

2020年11月16日

創建者 Geoffrey S Q

2021年4月13日

創建者 Ningesh k

2022年10月29日

創建者 KARIMULLA S

2020年8月21日

創建者 kishan n c

2020年9月25日

創建者 ADITYA N

2022年8月30日

創建者 Ashab U

2021年3月17日

創建者 Elphus M

2021年4月23日

創建者 Mykhaylo S

2022年5月21日

創建者 Pankaj R

2022年9月20日

創建者 Dean R

2019年11月17日

創建者 Enrique V

2020年6月20日

創建者 Dr.Krushnasamy V S

2020年7月4日

創建者 Adetifa O O

2020年12月6日